SDL2.0例子代码分析---代码运行平台检测

woaidaima2016 · 发表于 2017-12-18 17:41:40

想要查看内容赶紧注册登陆吧!

您需要登录才可以下载或查看，没有帐号？立即注册

x

简介SDL2.0例子程序中的 testplatform项目代码分析 ,针对不同的平台检测字节序 CPU支持的指令集类型宽度以及断言

代码+注释

#include <stdio.h>
#include "SDL.h"
#include "SDL_endian.h"
#include "SDL_cpuinfo.h"
#include "SDL_assert.h"
/*
* 该例子代码检测运行平台
*/
//判断变量占用字节数是否等于 hardcodetype
static int
badsize(size_t sizeoftype, size_t hardcodetype)
{
return sizeoftype != hardcodetype;
}
//检测系统是否出现错误类型貌似用处不大这段坑爹代码
//如果平台类型错误返回1 否则返回 0
int
TestTypes(SDL_bool verbose)
{
int error = 0;
//如果Uint8占用一个字节
if (badsize(sizeof(Uint8), 1))
{
//如果Uint8不等于1那么输出实际占用尺寸
if (verbose)
SDL_Log("sizeof(Uint8) != 1, instead = %u\n",
(unsigned int)sizeof(Uint8));
//错误次数++
++error;
}
//如如下类似上述
if (badsize(sizeof(Uint16), 2)) {
if (verbose)
SDL_Log("sizeof(Uint16) != 2, instead = %u\n",
(unsigned int)sizeof(Uint16));
++error;
}
if (badsize(sizeof(Uint32), 4)) {
if (verbose)
SDL_Log("sizeof(Uint32) != 4, instead = %u\n",
(unsigned int)sizeof(Uint32));
++error;
}
if (badsize(sizeof(Uint64), 8)) {
if (verbose)
SDL_Log("sizeof(Uint64) != 8, instead = %u\n",
(unsigned int)sizeof(Uint64));
++error;
}
if (verbose && !error)
SDL_Log("All data types are the expected size.\n");
return (error ? 1 : 0);
}
//测试尾数也就是机器的字节序
//windows默认是小端模式
//也就是低位先存原因是堆栈是由高地址向低地址扩展
int
TestEndian(SDL_bool verbose)
{
int error = 0;
Uint16 value = 0x1234;
int real_byteorder;
Uint16 value16 = 0xCDAB;
Uint16 swapped16 = 0xABCD;
Uint32 value32 = 0xEFBEADDE;
Uint32 swapped32 = 0xDEADBEEF;
Uint64 value64, swapped64;
//定义64位置也就是 0x00000000EFBEADDE
value64 = 0xEFBEADDE;
//右移动32位也就是四个字节
value64 <<= 32;
//将低位置为0xCDAB3412
value64 |= 0xCDAB3412;
//如下操作和value64雷同
swapped64 = 0x1234ABCD;
swapped64 <<= 32;
swapped64 |= 0xDEADBEEF;
//打印机器字节序是大端模式还是小端模式
if (verbose) {
SDL_Log("Detected a %s endian machine.\n",
(SDL_BYTEORDER == SDL_LIL_ENDIAN) ? "little" : "big");
}
//我们自己判断字节序将value转换为 char类型之后由于数据丢失变成了0x34 在windows下低位先存
//所以左移4位后变成了0x3了也就是小端口模式
if ((*((char *)&value) >> 4) == 0x1) {
real_byteorder = SDL_BIG_ENDIAN;
}
else {
real_byteorder = SDL_LIL_ENDIAN;
}
//如果我们分析的真正的字节序不等于 SDL给出的字节序那么输出真正的字节序 error++
if (real_byteorder != SDL_BYTEORDER) {
if (verbose) {
SDL_Log("Actually a %s endian machine!\n",
(real_byteorder == SDL_LIL_ENDIAN) ? "little" : "big");
}
++error;
}
//交换字节序输出
if (verbose) {
SDL_Log("Value 16 = 0x%X, swapped = 0x%X\n", value16,
SDL_Swap16(value16));
}
//如果交换后的值不等于 0xABCD
if (SDL_Swap16(value16) != swapped16) {
if (verbose) {
SDL_Log("16 bit value swapped incorrectly!\n");
}
++error;
}
//交换32位高度字节序
if (verbose) {
SDL_Log("Value 32 = 0x%X, swapped = 0x%X\n", value32,
SDL_Swap32(value32));
}
if (SDL_Swap32(value32) != swapped32) {
if (verbose) {
SDL_Log("32 bit value swapped incorrectly!\n");
}
++error;
}
if (verbose) {
//如果是微软的编译器也就是VC下打印出64位的交换字节序之后的值
#ifdef _MSC_VER
SDL_Log("Value 64 = 0x%I64X, swapped = 0x%I64X\n", value64,
SDL_Swap64(value64));
#else
//如果是其他编译器那么 64位置 ULONG 就需要定义为 unsigned long long 来代表 64位无符号 Integer
SDL_Log("Value 64 = 0x%llX, swapped = 0x%llX\n",
(unsigned long long) value64,
(unsigned long long) SDL_Swap64(value64));
#endif
}
//判断交换后的值是否等于 0x1234ABCDDEADBEEF;
if (SDL_Swap64(value64) != swapped64) {
if (verbose) {
SDL_Log("64 bit value swapped incorrectly!\n");
}
++error;
}
//返回错误状态
return (error ? 1 : 0);
}
//检测CPU 的特性
int
TestCPUInfo(SDL_bool verbose)
{
if (verbose) {
//打印CPU数量
SDL_Log("CPU count: %d\n", SDL_GetCPUCount());
//获取CPU Cache LIne的大小即CPU 一次从主存Copy的内存大小
SDL_Log("CPU cache line size: %d\n", SDL_GetCPUCacheLineSize());
//CPU是否支持RDTSC指令读取时间标签计数器
SDL_Log("RDTSC %s\n", SDL_HasRDTSC() ? "detected" : "not detected");
///cpu 是否支持 Altivec AltiVec提供了32个128比特向量暂存器,与之相比,SSE和SSE2只提供了8个
SDL_Log("AltiVec %s\n", SDL_HasAltiVec() ? "detected" : "not detected");
//cpu是否支持 MMX指令
SDL_Log("MMX %s\n", SDL_HasMMX() ? "detected" : "not detected");
//CPU是否支持SIMD ，由AMD开发的一套SIMD多媒体指令集，支持单精度浮点数的矢量运算，用于增强x86架构的计算机在三维图像处理上的性能
SDL_Log("3DNow! %s\n", SDL_Has3DNow() ? "detected" : "not detected");
//cpu是否支持SSE
SDL_Log("SSE %s\n", SDL_HasSSE() ? "detected" : "not detected");
//SSE2是否支持如下都是判断CPU是否支持一下加速指令集
SDL_Log("SSE2 %s\n", SDL_HasSSE2() ? "detected" : "not detected");
SDL_Log("SSE3 %s\n", SDL_HasSSE3() ? "detected" : "not detected");
SDL_Log("SSE4.1 %s\n", SDL_HasSSE41() ? "detected" : "not detected");
SDL_Log("SSE4.2 %s\n", SDL_HasSSE42() ? "detected" : "not detected");
SDL_Log("AVX %s\n", SDL_HasAVX() ? "detected" : "not detected");
//获取系统RAM大小也就是内存大小
SDL_Log("System RAM %d MB\n", SDL_GetSystemRAM());
}
return (0);
}
int
TestAssertions(SDL_bool verbose)
{
//sdl断言
SDL_assert(0);
SDL_assert_release(1);
SDL_assert_paranoid(1);
SDL_assert(0 || 1);
SDL_assert_release(0 || 1);
SDL_assert_paranoid(0 || 1);
#if 0 /* enable this to test assertion failures. */
SDL_assert_release(1 == 2);
SDL_assert_release(5 < 4);
SDL_assert_release(0 && "This is a test");
#endif
{
//获取所有的断言链表在调用SDL_GetAssertionReport 之前
/************************************************************************/
/*
typedef struct SDL_assert_data
{
int always_ignore;
unsigned int trigger_count;
const char *condition;
const char *filename;
int linenum;
const char *function;
const struct SDL_assert_data *next;
} SDL_assert_data; */
/************************************************************************/
const SDL_assert_data *item = SDL_GetAssertionReport();
//我们发现就是取出所有的断言结果输出
while (item) {
SDL_Log("'%s', %s (%s:%d), triggered %u times, always ignore: %s.\n",
item->condition, item->function, item->filename,
item->linenum, item->trigger_count,
item->always_ignore ? "yes" : "no");
item = item->next;
}
}
return (0);
}
int
main(int argc, char *argv[])
{
SDL_bool verbose = SDL_TRUE;
int status = 0;
/* 设置特定日志的优先级这里是应用程序日志 */
SDL_LogSetPriority(SDL_LOG_CATEGORY_APPLICATION, SDL_LOG_PRIORITY_INFO);
//如果参数1= -q 那么设置 verbose=faslse
if (argv[1] && (SDL_strcmp(argv[1], "-q") == 0)) {
verbose = SDL_TRUE;
}
if (verbose) {
SDL_Log("This system is running %s\n", SDL_GetPlatform());
}
//测试变量尺寸
status += TestTypes(verbose);
//测试尾数也就是测试机器的字节序
status += TestEndian(verbose);
//测试CPU信息
status += TestCPUInfo(verbose);
//测试断言
status += TestAssertions(verbose);
return status;
}

复制代码


	登录后可以保存扩展风格炉石传说

登录后可以保存 扩展风格

SDL2.0例子代码分析---代码运行平台检测

想要查看内容赶紧注册登陆吧!

登录后可以保存扩展风格